Sewage fittings, Standard series, polypropylene, gray

Polypropylene sewage fittings of the Standard series are intended use in regular housing sewage systems with the regular drainage temperature under 80°С and short-term (under 1 min) periods under 95°С. They can be used for chemically aggressive drainage with pH levels between 2 (acidic) and 12 (alkaline). Polypropylene fittings are produced by pressure casting from Polypropylene homopolymer (type 1) PP-H. Spigot-socket joint. Double-lipped sealing made of styrene-butadiene rubber with plastic spacing ring.

• Increased resistance to most chemicals;
  
• Not affected by corrosion;
  
• Smooth surface inside prevents sludge from forming on the walls and clogging up the pipe;
  
• Light weight;
  
• The socket joint with a pre-installed sealing ring significantly reduces installation times;
  
• High degree of leak tightness;
  
• Environment-friendly.